MidSouth Tech Session and Cook out
4 posters
Page 1 of 1
MidSouth Tech Session and Cook out
Alrighty..it's time to pick a date and make this happen.
Shed may or may not be built but there's still plenty of room without it and all the tools needed for just about anything one would want/need done to the bike is at our house.
I'm thinking end of March or begining of April. The 28th of March, 11th or 25th of April are my Satudays off. I'll be off the entire week prior to which ever day we pick for the Tech Session/Cookout.
We can do anything you need to your bike(s)..oil changes, brakes, add chrome and other goodies, valve jobs, possible tires if we have some advance notice(i'll have to clear use of a tire change unless I can get my own prior to then).
If you want to have new parts shipped here that's fine too and you can leave old parts here until you can pick them up if needed, but that can all be worked out on a case by case basis. Or if you need me to get anything I can as long as I can be paid the day of the tech session or in advance.
As for the valve jobs, you would need to trailer your bike here or drop it off Friday. If you can drop if off Friday I can give a ride home if not too far. Getting here Saturday morning would be up to you.
I'll buy the food(hamburger, ribs maybe, dogs etc) and have the grill ready. Bring you favorite drinks and sides.
Thoughts? Suggestions?
Let's get to planning and wrenching.
Shed may or may not be built but there's still plenty of room without it and all the tools needed for just about anything one would want/need done to the bike is at our house.
I'm thinking end of March or begining of April. The 28th of March, 11th or 25th of April are my Satudays off. I'll be off the entire week prior to which ever day we pick for the Tech Session/Cookout.
We can do anything you need to your bike(s)..oil changes, brakes, add chrome and other goodies, valve jobs, possible tires if we have some advance notice(i'll have to clear use of a tire change unless I can get my own prior to then).
If you want to have new parts shipped here that's fine too and you can leave old parts here until you can pick them up if needed, but that can all be worked out on a case by case basis. Or if you need me to get anything I can as long as I can be paid the day of the tech session or in advance.
As for the valve jobs, you would need to trailer your bike here or drop it off Friday. If you can drop if off Friday I can give a ride home if not too far. Getting here Saturday morning would be up to you.
I'll buy the food(hamburger, ribs maybe, dogs etc) and have the grill ready. Bring you favorite drinks and sides.
Thoughts? Suggestions?
Let's get to planning and wrenching.
Re: MidSouth Tech Session and Cook out
I like the way you think???? That could work!
.......................bobby
.
.......................bobby
.
twin1300- Admin
- Number of posts : 4689
Age : 64
Location : Denham Springs, La.
Registration date : 2007-12-14
Re: MidSouth Tech Session and Cook out
As for the valve jobs, you would need to trailer your bike here or drop it off Friday.
Toasted, why would you want to trailer a bike in the first place? I understand your reasoning for it, but, I like to go vroom vroom. To bad it's not down here in the sunny tourist trap from hell , got too many things to do and not enough money or a place to work on it. They frown upon my dismantling my bike in the apartment parking spot for some reason and the school won't let me think about working on it there.
Re: MidSouth Tech Session and Cook out
I would love to stop by and meet some fellow darksiders. hopefully i will be through putting mine back together way before then. Replacing the steering bearings and polishing a few parts. I have got to make a socket so i can torque the new bearings down and prolly use up all my elbow grease to finish.
DEFREEZER- Number of posts : 60
Age : 58
Location : nesbit, mississippi
Registration date : 2008-04-14
Re: MidSouth Tech Session and Cook out
Can't make it...don't have a replacement yet! I wish they would hurry up and hire someone already! Dang, I would love to make that!
...........................bobby
.
...........................bobby
.
twin1300- Admin
- Number of posts : 4689
Age : 64
Location : Denham Springs, La.
Registration date : 2007-12-14
Similar topics
» Tech day
» Dynabead like tech
» So which tech forum do I fall under?
» Wind Chill tech
» Welcome to the 1800 tech forum.....
» Dynabead like tech
» So which tech forum do I fall under?
» Wind Chill tech
» Welcome to the 1800 tech forum.....
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|